null

Highlands True Divided Lite Double Entry Door

MSRP:
Was:
Price: Now: $6,200.00
(You save )
(3 reviews) Write a Review
Grand Entry Doors Highlands True Divided Lite Mahogany or Knotty Alder Double Entry Door | Wood Species (as pictured): Knotty Alder, also available in Mahogany, Glass (as pictured): Clear Bevel | Pictured Finished / Stained. All wooden front doors are priced and delivered as unfinished / not stained pre-hung units. No finish options available for shipped units.

The Highlands exterior wood door has a unique prestigious style with a slight rustic feel. Offered as a mahogany or knotty alder wood, this double entry door is a Grand Entry Doors customer favorite. The Highlands entry doors feature true divided lite (TDL) Low E Glass that provides na(...Full Description & Specifications Below ↓)

Current Lead Times (as of 09/30/22)

Special Order - Typically ships in 14-16 weeks (from NC). Transit times will vary. Customers might experience a delay due to supply chain and shipping delays. Please note: These are the same lead times that will be quoted by phone.
  • Clear Beveled
  • Flemish
  • Black / Dark Bronze
  • Satin Nickel
  • Black / Dark Bronze
  • Nickel
  • No Handleset Prep
  • Double Bore, 2-3/8" Backset Active Door Only - Handleset & Deadbolt
  • Multi-Point Locking (GU-2 American Cylinder Hub Above Handle 3-5/8” Center-to-Center) - Multi-Point
  • No Handleset Hardware
  • Recommended – Will purchase multipoint handleset trim separately elsewhere. Must be compatible with GU/Emtek Door Configuration 2 - American Cylinder Hub Above Handle 3-5/8” Center-to-Center - Multi-Point
  • Emtek Multipoint Scroll Trim, Keyed with American Cylinder - Multi-Point
  • Emtek Multipoint Scroll Trim, Keyed with American Cylinder & Dummy Pair - Multi-Point
  • Emtek Multipoint Square Trim, Keyed with American Cylinder - Multi-Point
  • Emtek Multipoint Square Trim, Keyed with American Cylinder & Dummy Pair - Multi-Point
  • Flat Black
  • Satin Nickel

Please check your selections carefully. Each door is prepped to your specifications. Buyer assumes all risks of incorrect measurements. Your order authorizes Grand Entry Doors to furnish the products described and rendered. Grand Entry Doors is only responsible for furnishing and shipping the item as specified on your order.  All return shipments at Buyer's risk and expense. If you have any questions please contact us prior to placing your order.

Get Free Quote Now
Price
$6,200.00
Price As Configured
MSRP:
Was:
Price: Now: $6,200.00
(You save )
Shipping:
Calculated at Checkout

The Highlands exterior wood door has a unique prestigious style with a slight rustic feel. Offered as a mahogany or knotty alder wood, this double entry door is a Grand Entry Doors customer favorite. The Highlands entry doors feature true divided lite (TDL) Low E Glass that provides natural light to your home, while still providing energy and thermal efficiency. The traditional yet rustic feel of the Highlands makes it one of the most popular and sought-after options for front doors for homes.

Highlands Mahogany or Knotty Alder True Divided Lite Double Entry Door

The Highlands True Divided Lite Double Entry Door offers an engineered stile and rail construction crafted of a hardwood laminated veneer lumber core offering more stability and resistance to warping than solid wood. The Highlands is a True Divided Lite (TDL) entry door featuring individual glass units divided by muntin bars. Low-E glass better insulates your home by keeping heat from escaping during the cooler months, and helps to minimize the heat entering your home during the warmer months.

All wooden front doors are priced and delivered as unfinished (not stained) pre-hung units. 

The Highlands offers

  • 5'0", 5'4", and 6'0" X 8'0" sizes (Custom doors sizes available with quote)
  • 1-3/4" stain grade mahogany (Okoume) or knotty alder
  • Clear bevel and flemish glass options
  • Low-E glass (Low Emissivity Glass) - Tempered / Insulating Glass
  • Wood entry door with engineered stile and rail construction
  • Hardwood laminated veneer lumber core
  • Unfinished (not stained), prehung exterior door unit includes the jambs, exterior brickmould, weather-stripping, door sweep, adjustable threshold (sill), 4x4 ball bearing hinges. Double door units include astragal mounted on the passive door with flush-mount slidebolts securing the passive to the frame
  • Can be considered an option for those seeking interior / internal doors with glass (contact us to inquire)

Size Information

Door SizeFrame SizeRough OpeningOutside Brickmould
5'0" x 8'0" 62 1/2" x 99" 63 1/2" x 99 1/2" 65" x 100 1/4"
5'4" x 8'0" 66 1/2" x 99" 67 1/2" x 99 1/2" 69" x 100 1/4"
6'0" x 8'0" 74 1/2" x 99" 75 1/2" x 99 1/2" 77" x 100 1/4"


Custom sizes and options available upon request (price and lead time varies and must be quoted).

Energy Performance

U-Factor, Solar Heat Gain Coefficient, and Visible Transmittance in accordance with the National Fenestration Rating Council (NFRC).

  • U-Factor (Btu-in/hr-ft2-F) = 0.40
  • Solar Heat Gain Coefficient (SHGC) = 0.09
  • Visible Transmittance (VT) = 0.06

Pre-Hung Door Unit

  • 4-9/16" or 6-9/16" wide jambs (with 4-9/16" jamb commonly used for 2x4 framing and 6-9/16" jamb commonly used for 2x6 framing). Custom jamb sizes available upon request.
  • Q-lon weatherstripping (made of polyethylene-clad urethane foam) applied at the top and sides of the prehung door to keep out drafts
  • Commercial grade 4"x4" bearing hinges in Black/Oil Rubbed Bronze or Satin Nickel
  • Adjustable aluminum door sill (threshold) in Black/Oil Rubbed Bronze or Satin Nickel
  • Door sweep to seal the gap between the bottom of the door and the threshold/sill
  • Pre-drilled door for handle and deadbolt (on double we typically recommend only the active since the requirements for the passive or “dummy” handle are unknown unless we are providing the handleset hardware)
  • Exterior brickmould
  • Double entry door units include T-astrigal and a pair of flush-mount slide bolts installed on the secondary (passive) door

Door Jambs

Our pre-hung units are hung on on slotted jambs for installation of weather-stripping. 

  • Q-lon weatherstripping (made of polyethylene-clad urethane foam) applied at the top and sides of the door to keep out drafts
  • 4-9/16" jamb is most commonly used for 2x4 framing
  • 6-9/16" jamb is most commonly used for 2x6 framing
  • Custom jamb sizes available (additional charges may apply)

Hinges

Our pre-hung units include commercial grade, 4x4 ball bearing hinges.

  • 4"x4" commercial grade ball bearing hinges (Three are used on 6/8 doors and arch top doors, and four on taller square top units).
  • Non rising steel pin with button tip and plug
  • Rounded 1/4" radius corner
  • Black/Oil Rubbed Bronze or Satin Nickel finish 

Sill / Threshold

Each pre-hung unit comes with a composite adjustable aluminum sill. The composite aluminum is used to prevent warping, rotting, etc.

  • Features a composite substrate that will not warp or rot, eliminating the worries of wood.
  • Black/Oil Rubbed Bronze or Satin Nickel finish
  • Outswing bumper sill available for outswing units
  • Low-profile (ADA-compliant) sills are available. Please contact us for pricing

Handleset Preparation

  • Pre-drilled door for handle and deadbolt (on double we typically recommend only the active since the requirements for the passive or “dummy” handle are unknown unless we are providing the handleset hardware). Single bore on passive can also be provided.
  • Standard Handle and Deadbolt Preparation at 2-3/8" backset (2-3/4" available upon request)
  • Bore diameter: 2-1/8"
  • For double bore, deadbolt is drilled 5-1/2" above the handle
  • Multipoint locking also available

Additional Information Regarding Pre-Hung Units

Product Compliance & Suitability

Jurisdictions have varying laws, codes and regulations governing construction, installation, etc. Please review applicable laws, codes and regulations for your local jurisdiction to be sure that the construction, installation, and/or use involving the units is compliant.

Florida Approval Code: No
FSC Certified: No

Requirements For Adequate Overhang Protection Of Wood Door

Installer must ensure proper protection requirements are provided where the door will be installed. All doors must be installed providing sufficient protection from exposure to weather including excessive moisture/rain as well as excessive heat due to sun exposure. This protection required includes adequate overhang distance that is at a minimum projection from the home at one half the distance from the floor of the overhang to the ceiling of the overhang.

Manufacturer's Warranty

Please review our FAQs for common questions, definitions and clarifications. 

3 Reviews

  • 5
    Loving our new doors!

    Published by Deborah Lewis on Oct 28th 2021

    We are loving how warm and inviting these doors make our home look. Highly recommend Grand Entry Doors.

  • 5
    This is a beautiful door!

    Published by Davis on Jun 30th 2021

    We received our door last week, and had it installed yesterday. We could not be happier. We ordered it in knotty alder and love the rustic charm of this door. This is a beautiful door and it far exceeds our quality expectations! Thank you to Kevin and Grand Entry Doors!

  • 5
    Responsive and Courteous

    Published by Bobby Smith on May 10th 2021

    This is the first time we made a purchase like this online. To say we were intimidated is an understatement. We called a few other online door companies. Very few of them answered the phone or returned our calls. Kevin returned our call promptly. He was very responsive to all of our questions and always courteous to us.

Related Products