Description
Oil Rubbed Bronze Hinges & Sills (Thresholds)
Choose Option When Configuring Door Unit
Oil Rubbed Bronze Hinges & Sills (Thresholds)
To protect your door and maintain its warranty, an overhang is required to shield it from moisture, rain, and sun. The overhang must project at least half the height from the floor to the ceiling of the overhang and extend 3 feet on both sides. Without this, the warranty is void.
Our wood doors feature floating panels to handle natural expansion. However, if installed without proper protection, moisture may enter through the panels. This is not considered a defect, and homeowners are responsible for addressing any water penetration in such cases.
Important Consideration for Southern-Facing Doors: Wood doors installed in southern-facing orientations are more prone to warping and cracking due to prolonged exposure to direct sunlight throughout the day. The prolonged sun exposure and excessive heat can cause the wood fibers to expand unevenly, leading to potential cracks in the wood panels over time. To mitigate these risks, it is essential to install the door under a deep overhang that extends beyond the minimum recommendation for our warranty purposes to provide adequate protection. If you're uncertain about the direction your door faces or the amount of time it is exposed to the sun during the day, a helpful resource is SunCalc.org, which can provide detailed information about sunlight exposure for your home.
Choosing a finish with a high light reflective value (LRV) is crucial. Dark opaque colors, like black, absorb heat and UV rays, causing damage and will void the warranty.
Disclaimer: The stain and finish colors shown on our website are selected by customers and do not represent an endorsement or approval of any particular color by our company. The choice of stain color should consider factors such as the direction your home faces, the amount of sun exposure, and the size and projection of overhead coverings that provide shade and protection. Please note that staining or painting the door black or any other dark, opaque colors will void the warranty. These colors absorb excess heat and UV rays, which can damage the wood components. Due to the variability of installation conditions, we do not provide an approved list of colors. For a general guide, please visit our Frequently Asked Questions.
Use only high-quality exterior stains and clear coats with UV inhibitors to protect wood from fading, cracking, and moisture damage, ensuring long-lasting durability.
All exposed surfaces of the door must be sealed, including the top, side edges, and hardware cutouts. The top is frequently overlooked, which can lead to moisture penetrating the wood, causing swelling and warping. The bottom is pre-sealed before the door sweep is installed. Multiple coats may be necessary for optimal protection.
Using storm doors with wood entry doors can cause problems, especially in extreme weather. The heat trapped between the storm and wood doors can lead to warping or cracking, and poor ventilation may cause moisture buildup, damaging the wood. Therefore, using a storm door will void the warranty.
Local building regulations, codes, and laws can vary greatly from one area to another. It is crucial that you consult with your professional contractor and adhere to the specific regulations and codes relevant to your location. Therefore, it is your responsibility as the customer to review and understand the applicable laws, codes, and regulations in your jurisdiction to ensure that the construction, installation, and use of our doors comply with local requirements.
No Florida Product Approval This door does not have Florida Product Approval, as required under the Florida Building Code (FBC) for certain products installed in the State of Florida. Florida Product Approval certifies that building components meet state-mandated performance criteria, particularly for wind resistance and impact protection in high-risk areas.
Because this product lacks Florida Product Approval, it may not be eligible for permitting or installation in jurisdictions where such approval is required, including but not limited to High Velocity Hurricane Zones (HVHZ) and Wind-Borne Debris (WBD) regions. This product should not be considered code-compliant in those areas.
Customer Responsibility & Code Compliance - This door unit does not carry a Design Pressure (DP) rating or an Impact rating and has not been tested for compliance with specific structural or impact standards that may be required by the Florida Building Code or local ordinances for hurricane protection.
Local building codes, permitting requirements, and enforcement policies vary significantly by jurisdiction in Florida. It is the customer’s responsibility to consult with a licensed contractor, architect, or local building official prior to purchase to determine whether this product is permissible for the intended project or location.
The customer is also responsible for ensuring that all aspects of construction, installation, and use of this product comply with applicable building codes, zoning laws, and permitting requirements. We assume no responsibility or liability for products that are not approved or permitted.
No Design Pressure (DP) or Impact ratings. This means this door might not comply with specific standards required for hurricane protection in coastal regions, including areas designated for Wind Borne Debris (WBD) or within the High Velocity Hurricane Zone (HVHZ).
The DP rating shows a door's ability to withstand wind or snow loads, important for extreme weather areas. An impact rating measures resistance to debris during storms, crucial for high-velocity wind zones.
High-Altitude Installations Please be advised that the glass used in our doors is not specifically designed or rated for high-altitude installations. At higher elevations, changes in atmospheric pressure can affect the integrity and performance of standard glass. This may result in issues such as increased pressure on the glass panes, potential seal failures, and compromised insulation properties.
Certification for Glass Products Our insulated glass units are stamped to indicate that they are tempered glass, ensuring compliance with industry safety standards. The safety stamp is applied using durable methods and cannot be removed. Per International Building Code, the stamp shall be acid etched, sand blasted, ceramic fired, laser etched, embossed, or of a type that, once applied, cannot be removed without being destroyed. These glass units are labeled as "Safety Tempered" and marked as certified meeting the requirements of ANSI Z97.1.
This permanently etched stamp appears in the bottom corner of each glass unit. For multi-lite designs, such as a 6-lite unit, the marking will be present on all individual panes. It has been minimized as much as possible while maintaining compliance with building code requirements.
Experience superior energy savings with our double-pane, insulated Low-E glass units, designed to keep your home bright and comfortable year-round. The double-pane construction creates an insulating barrier that reduces heat transfer, keeping your home warmer in the winter and cooler in the summer. The Low-E (low emissivity) coating reflects infrared heat, minimizing energy loss while allowing natural light to filter through. Each glass option is crafted from durable, tempered glass, ensuring enhanced safety and long-lasting peace of mind for your family. Enjoy the perfect balance of beauty, efficiency, and security with our premium glass doors.
Double-pane insulated Low-E GlassAt Grand Entry Doors, we’re more than just a source for stunning, high-quality doors—we’re here to help you transform your home’s entry into something truly grand. Whether you’re looking for one of our exquisite wood entry doors or seeking a custom design to perfectly fit your vision, we provide the inspiration and expertise to bring your ideas to life.
Specializing in wooden front doors and custom entry design, we offer an impressive selection of mahogany and knotty alder doors. Choose from our in-stock collection or work with us to create a custom door that reflects your unique style. With top-tier craftsmanship and the finest materials, we deliver doors that not only elevate your home’s curb appeal but also provide lasting beauty and quality.
